How To Prevent display errors after flashing SPD and MTK devices

I've been receiving lots and lots of complains about screen errors such as touch not working, blue/white/black screen, display is up side down etc after flashing itel phones. 

The phone boots normal you heat sounds ok but just can't operate it due to this screen error. This mostly happens when you use a firmware (flash file) which is outdated or the display drivers found in ubootloader or uboot file inside the Stock ROM does not match with the current device at hand.

 For example if an itel IT1408 with build id IT1408-W404-20160902 is flashed with and older firmware lets say IT1408-W404-20160317 the phone might not boot up or have display issues after it boots up.

Note

The following points below are just safe practices

It does not mean that mean that flashing older firmware will always cause screen issues.

This happens only on some devices.

Even though what is written below are safe points, use them at your own risk.

I know you might be wondering now how to know if the firmware you are about to flash corresponds to the device. 

Its very easy if the device still boots properly, just check the the build number and see if it tally with the file you want to download. The file to be downloaded must not always have the same id with the device. You can also use and updated file to flash the phone. So its either you use a firmware with same id or and updated id.

********

If the phone can't boot, use Miracle Box to read the current Build id of the phone

To Read the build id with Miracle Box,

For Spreadtrum (SPD) devices

Launch Miracle Box

Under SPD tab, Click Readinfo

Under Choose type select the chip of the device

Click Start button and connect phone while holding boot key

Wait for Miracle box to display you all details of the device

From the details, you will see the build id

Now compare with the ROM you downloaded and see if its

For MTK devices

Launch Miracle Box

Under MTK tab, Click Readinfo

Click Start button and connect phone to PC

Wait for Miracle Box to detect device and show all info

From the info you will find the build id of the device

Now compare it with the firmware you want to flash

********

Ok if you still have the guts to flash the device with the firmware which does not correspond to the build id of your device, its always good to do a full stock ROM backup of the device so that after flashing if something is wrong, you can restore the backup.

Use Miracle Box or Infinity CMII to do stock ROM backup.

How to Stock ROM backup for SPD devices with Miracle Box, 

with Miracle Box, 

Launch Miracle Box

Under SPD Tab, Click Read

Under Choose, Select chip of the device

Click Start and connec phone to PC while holding boot key

Select were to save backup and click OK

Wait for backup process to complete

How to Stock ROM backup for MTK devices with Miracle Box

Launch Miracle BoxBox

Under MTK tab, Click Read

If you want the backup to save as scatter file, tick scatter file else don't tick

Click start button and connect phone to PC

Select were to save backup and click OK

Wait for backup process to complete

********

If you just want ignore all the process above and go on directly with the flash process, at least take a second or rwo not to select uboot (MTK devices) or ubootloader (SPD devices) before you begin the flash process it might save you from a lot of problem.

Conclusion

Yeah I know I've not uploaded some new firmware of some devices thats because of my day in day out schedule and of course DATA for uploading LOL but I still try my best to be updating the files as quick as possible. So if you have searched around and can't find the Stock ROM you are looking for, this few tips might just come in handy. If you have more  tips, you can always share for others to learn.

Read More »

How to fix null/invalid imei on mtk devices using Miracle Box

When the imei of your device is corrupted you can't make or receive calls with the device, if you dial *#06# it shows null/invalid.



I've done other tutorials on how to repair the imei of mtk devices using apps like mtk engineering, chamelephon and sn write tool. These apps are great apps but they do have their downside for example the mtk engineering app is very easy to use but will not work on some devices with android 6.0 this is frustrating.

Using chamelephon to repair imei is also easy but requires the device to be rooted.

Again SN Write Tool also have the tendency of show FAILED again and again. You might cry if you are not that strong.

Here is just another tutorial which shows how to fix null/invalid imei number on mtk devices using Miracle Box. This method is simple and does not require you to root the device.

You can just follow the tutorial below




Note

IMEI CHANGE IS ILLEGAL

Use this tutorial at your own risk!! 😜

Must have installed MTK VCOM Drivers properly on your PC
Download Miracle Box here
Launch Miracle Box

Tick Readinfo

Now Press Ctrl + M on your keyboard

Two new options IMEI (switched off) and IMEI (switched on) will appear
Select IMEI (switched off)

Type in the IMEI numbers in the spaces shown (IMEI number of your device is on sticker under your phone)

Click Start Button

Turn off device and connect to PC with USB
Now wait for the process to complete

When you see W IMEI1 OK: XXXXXXXXXXXXXX
That means the operation was successful
Disconnect and boot up device.
Do not get concerned if the progress bar is not upto 100% 😉

Read More »

How to fix no start button on miracle box

Many people have been complaining about the miracle box I posted that the Start Button no longer shows (it grays out) so there is no way to use it again.





Advantages of the update

Miracle box update always comes with great feature and UI interface. Some of the feature is as follow
1. New support phone are added
2. New support chip set are added
3. New UI interface
4. New repairs tabs are added

Disadvantages of miracle Update

With everything that has advantages will also have its share of disadvantages. Miracle box is not an exception. Some of the
disadvantages can be listed below

1. The new update may require an internet connection to work
2. The new update may require an addition hardware to work
3. The update may require renew of licenses
4. Will not support all crack version of the box
The cause of the compulsory update

Miracle box is initial made to work offline but however, when internet connection is available to the computer and the miracle box interface is open, the box will automatically search for update.

When the update available it prop a consolatory update and you can’t use the box without updating it.

If you are not interested with, the new update because of any of the reason.

1. Don’t have the addition money to spend on the licensees

2. Additional Hardware

3. You are using the crack version.

Then, you most always end all internet connection before opening the miracle interface.



This is because Miracle Box team made their software to expire over a period of time so that you must update to the latest.

Well this is one of the reasons why I really like this box. It shows they are prepared to keep up with new updates.

And also this is one of the numerous reasons why you should buy the original Miracle Box

Well enough said the simple steps below will make the Start button show again.

Before you launch Miracle Box loader,

Do the following

Go to your date and time settings
Back date the current date to any date in 2015

Save it as the current date

Now launch Miracle box loader again and you should see the Start Button again

Enjoy this magnificent tool for mobile devices.

You can also watch the video below


There are always lots of new features in the update of this box. If you do repair phones often, I suggest you get this Box. It will help not only you but also the developers of this wonderful tool.

Read More »

How to flash spreadtrum devices (iTel, M-Horse, ChItrerry etc) using Miracle Box

This is another tutorial on how to use Miracle Box for newbies. I will be showing you how to flash/upgrade devices with Spreadtrum Chipset (SPD) using Miracle Box. Watch the follow the tutorial below




Note
You must have at least 10% battery life
Do at your own risk!





Download Miracle Box from here
Download and install SPD drivers

Launch Miracle Box

Click on SPD tab

Tick Write

Under Choose type, select the chip of the phone you want to flash
Click the folder Icon, then navigate to the folder containing the pac file of the device you want to flash.
Select the pac file
Click Start Button

Turn off device and connect to PC while holding volume down button
(Some new devices require holding volume up instead)

Miracle Box will detect the device and pop up all partitions to be flashed.

Tick whatever part you want to flash on the device and click OK.
(For full flash, tick everything)

Wait for flashing process to complete
When you see Write Complete, know that flashing process is complete.
Disconnect and reboot device

If you enjoy using this software, buy the box to support developers & also get latest updates

Read More »

How to unlock MTK devices locked with Pattern Lock without Factory Reset With Miracle V2.27

This is the second tutorial on miracle box for newbies.
for other Miracle box tutorial,



Most times its annoying to factory reset a device just to remove pattern code because apps, data & some user settings will wipe out.

This tutorial will show you how to read and unlock the pattern lock of any MTK device without factory reset it.


Just watch the video or follow the steps below




-Download and install MT65XX drivers


-Download Miracle Box from here
Launch Miracle Box

-Under MTK Tab, Click Unlock/Fix

-Tick Read Pattern

-Click Start Button

-Now turn off device and connect to PC using USB cord

Miracle Box will detect device
Wait for few seconds for Miracle to analyse the pattern data of the device

When you see Done, Know the process is complete

The Pattern code will be displayed in numbers which you will input according to the 3X3 matrix input on your phone

Example: 125789
You will draw the pattern from dot 1 to 2 to 5 to 7 to 8 to 9

Read More »

How to read phone unlock codes of spreadrum feature phones (basic retro phones)

Feature phones are really good in terms of making calls and battery life. We mostly put our main call lines in it. When you forget the passcode you are kind of frustrated because its not possible for you to read your text messages. The tutorial below will show you how you can easily read an know the code. Just watch the video or follow the simple steps.




Download Miracle Box
Download and install SPD USB Drivers

Launch Miracle Box
Click on SPD tab
Tick ReadInfo
Under choose type, select the chip type of the phone
(most new devices now use SPD6600L/RT/WT6226/6531)
Click Start Button

Now turn off device
Hold boot key on the phone then connect it to PC


Common boot keys of spd feature phones are left softkey, right softkey, center button or the 0 button (some devices may use different) but its always good to test in that order.




When phone is detected, it will read and analyze the data then display the unlock code (process takes about 30 secs)
Boot the device and enter the unlock code shown in Miracle Box software
Sometimes about 3 passcodes are seen just test them one after the other.



If you don't want to use the current code again, you can easily disable it from settings.

Hope this helps

Read More »

ITEL Download iTEL iT5300 FlashFile

ITEL iT5300 FlashFile Firmware
This flashing file is .bin file For itel it15300
Flash this using miracle box

iTEL iT5300 fLASHfILE

Download

Read More »

How Backup MTK Using Infinity Chinese Miracle-2(cm2)-without root

Must Read:How Flash MTK Using Infinity Chinese Miracle-2(cm2)

In these article you can backup your mtk stock rom or firmware with or without root

Requirement

1.Mtk Driver

2.Mtk Phone with Any 6xxx cpu

3. Activated Cm2 Dongle connected to your pc(window xp-window 10)

Procedure:

1.Select the cpu of the MTK YOU WANT TO BACKUP
MTK




2. Select on Read factory file and click Read Firmware (2)

3. As it showing waiting……. Turn of your phone and connect USB it will process then it will prompt where to save the file, save on any folder of your choice



4. you can locate your backup and and zip

Read More »

How To Remove Frp, How To Unlock Network On Mtk Using Infinity Chinese Miracle-2(cm2)

How To Remove Frp, How To Unlock Network On Mtk Using Infinity Chinese Miracle-2(cm2) with out root

This article will guide you on basic operations on cm2

1.Frp unlock/ wipe userdata

2. Unlock Netwrok on mtk phones wiko,zte, alcatel vodafone on any mtk phone up to 6.0.1 without root

Requirement

1.Mtk Driver

2.Mtk Phone with Any 6xxx cpu

3. Activated Cm2 Dongle connected to your pc(window xp-window 10)

Procedure

1.connect and launch your cm2 dongle “InfinityBox CM2MTK” select your cpu



2. select Frp(Reset protection) (2) and click (Format/Reset settings)



Turn of your phone and connect USB cable will it showing waiting… allow the dongle to do the magic (Frp removed)

you can also use (1) Full factory reset. Enjoy

How To Unlock Network on Mtk without root

Turn off your phone or remove battery and select the action on the picture below (sp unlock)



As it showing waiting connect your USB cable and allow the dongle to do it magic less than 20 sec your mtk phone is fully unlocked

Read More »